The Sangoma Vega acts as a gateway between your ISDN PBX and our SIP servers, allowing you to use Gradwell trunking services. The unit is rack mountable.
Remove the unit from the box and take out the yellow ended Ethernet cables. Plug one end into the IF1 port on the rear of the unit, and the other end to your ISDN PBX.
Use another Ethernet cable to connect the LAN1 port on the unit to your router or switch.
Connect the power lead and when ready turn on the unit using the power switch on the rear. The unit will boot up and request an IP address by DHCP. Please see this article for information on discovering the IP address assigned to the unit, and this article for information on configuring the unit.