To answer a call
Pick up the handset to answer an incoming call.
Alternatively, use the tick button to pick up the call on the headset (if any) or press the Speaker button for hands-free operation.
To switch between two calls on line 1 and line 2
Press either the L1 or L2 button to put one caller on hold and speak to the other. The active line is shown by a fast blinking light, the held one by a slow blink.
To make calls
Enter the number using the keypad then pick up the handset to make a call; press the tick button to use the headset, or press the Speaker button to make a hands-free call.
- To dial an IP address, hold the hash key down to enter a dot
- To dial a SIP URL, press 1 then use the down-arrow on the menu navigation key to toggle between lower-case, capital letters and numbers, as indicated in the bottom right of the display. Use the left-arrow key to backspace and correct mistakes. Use the 1 key twice to get the @ character
To make attended transfers
Put the caller on hold by pressing L1/L2 as appropriate. Dial the destination number as usual and speak to the recipient. Then press the Transfer and tick buttons to put the caller through and hang up your connection.
To make conference (three-way) calls
To make a conference call, initiate two calls (if you have a call in progress, press L2 to place the first caller on hold and dial the second number). Press the tick button to create the conference call.
To disconnect the conference call, press the tick button again and hang up each call as required.
To pick up voicemails
Dial *1 and enter the voicemail password when prompted (which you will find in the extension details in your VoIP control panel).
Setting up a headset
Navigate to the web interface of your snom. Use the Setup > Preferences link at the left to choose your headset, and save the changes.
Adding extra accounts
You can add up to four accounts on your device. Simply follow the same procedure as outlined in this article to do this. For example, you might want to add the an extra account in identity two. You can use different ringtones for different identities if you wish, which will help you tell which account is being called.
To switch between accounts, simply use the left or right silver arrow keys on your device.