To make configuring your snom phone easy you can use the web interface to configure the device. To do this you will need to know the IP address of your phone.
Once you know the IP address you can enter it into your web browser to view the web interface (please note you may be prompted for a username and password - please see this guide for assistance if you purchased the phone from Gradwell).
For example, in this picture below we have found the IP address of the phone to be 192.168.1.10 and entered this in the address bar of the web browser (where you would usually type a website name).
Finding the IP address on your snom 300
Press the down key on the silver navigation button on your phone.
Keep pressing until you see Information and IPAdr on the display
Press the tick button to display the IP address on the display.