Follow steps 1 - 4 in the included Gigaset N300 IP Getting Started booklet, this will walk you through setting up the N300 IP Basestation on your network.
In order to configure the VoIP connection (if necessary) then you will need the following pieces of information:
- Your Extension Number
- Your Extension Password
If you have purchased the N300 IP and DECT Handset(s) directly from Gradwell, then the units will arrive configured and setup ready to use.
Gradwell have worked with Gigaset to become a listed VoIP provider, this means that most of the initial setup will be performed automatically for you as our server details are stored online.
Follow steps 5 - 8 to setup and register the N300 IP with the Gradwell network, we also recommend changing the default PIN from 0000 to something that you will remember for security.
Next, unpack and setup any handsets that have been purchased and follow step 9 - Registering the Handset, this will register your handsets to the N300 IP which will allow you to make and receive calls.
Follow step 10, this allows you to assign the VoIP connection that you configured above to a handset in order to make and receive calls.